Synthesis and characterization of a novel high thermally stable energy compound： 1-（1-Adamantylamino）-2,4,6-trinitrobenzene

1-（1-Adamantylamino）-2,4,6-trinitrobenzene （1） as a potential energy material has been synthesized in excellent yield and characterized by FT-IR, 1H NMR and single crystallographic methods, and is thermally stable, decomposed in the range of 215- 72℃.     

Mechanism of N-octadecyl-N1-maleoyl-L-phenylalanine self-assembled into supramolecular structures

N-Octadecyl-N1-maleoyl-L-phenylalanine （ODMA-L-Phe） was synthesized through the condensation, deprotection and acid- ylation reaction of BOC-L-phenylalanine, octadecylamine and maleic anhydride. ODMA-L-Phe can self-assemble in some organic solvents and turned them into thermally reversible physical supramolecular organogels. The morphology of ODMA-L-Phe aggregates was characterized by polarized optical microscopy （POM） and field emission scanning electron microscope （FE-SEM）. The aggregates of ODMA-L-Phe were needle-like fibrils with diameters of approximately 100-200 nm. The mechanism of ODMA- L-Phe self-assembly in organic solvents was investigated using XH NMR and circular dichroism （CD）. The results indicated that hydrogen bonding was one of the main driving forces for the self-assembly of ODMA-L-Phe.     

Synthesis and biological evaluation of novel thalidomide analogues as potential anticancer drugs

In search of novel anticancer agents, a series of thalidomide analogs （6a-j） were designed and synthesized. Cytotoxicity of these compounds against human hepatoma cells （HepG2） was evaluated by MTT method. Compounds 6d, 6h and 6i showed significant cytotoxic activities comparable to or stronger than control 5-fluorouracil.     

Photoluminescence and Electroluminescence of Organic Light Emitting Diodes Based on Tris‐(8‐quinolinolato) Aluminum Nanoparticles

利用共沉淀方法制备出平均粒径为20nm的有机物8-羟基喹啉铝纳米粒子,8-羟基喹啉铝纳米粒子呈球形且粒度不随老化时间的增加而改变。本文研究了8-羟基喹啉铝纳米粒子的光致发光及基于8-羟基喹啉铝纳米粒子制作的电致发光器件的电致发光特性。8-羟基喹啉铝形成纳米粒子后,其光致发光及电致发光发射光谱的谱峰均出现蓝移。随着驱动电压的增加,器件中8-羟基喹啉铝纳米粒子的发射峰逐渐红移。在驱动电压为16伏时,8-羟基喹啉铝纳米粒子器件的最大亮度达600cd/m²,电流密度为150mA/cm^-2时,器件的发光效率为0.19cd/A。基于8-羟基喹啉铝纳米粒子器件的发射光谱证实了AlQ₃纳米粒子具有量子尺寸效应的存在,这为有机纳米电致发光器件的研究开辟了一条新的研究路线,同时也为那些传统的有机材料如有机分子晶体的基础研究探索出新的研究方向。     

一种新颖的二维4f-3d-5d多金属-异烟酸配合物的合成、晶体结构和磁性研究

通过水热方法合成了一种新颖的异金属金属-异烟酸无机-有机杂化体[Zn0.5(H2O)]{(Hg2Cl5)[Er(C6NO2H4)3(H2O)2]}(HgCl2)·0.5CH3OH·0.5H2O (1)并对其进行了单晶X-射线衍射结构表征。该化合物是首例4f-3d-5d多金属-异烟酸配合物。化合物1属于单斜晶系C2/c空间群,每个单胞中有8个分子,晶体学参数为：a = 34.165(4) Å,b = 9.4692(8) Å,c = 24.575(3) Å,β = 115.090(5)°,V = 7200(1) Å3,C18.50H21Cl7ErHg3N3O10Zn0.50,Mr = 1495.25,Dc = 2.759 g/cm3,T = 293(2) K,μ(MoKα) = 15.954 mm-1,F(000) = 5400, R1/wR2 = 0.0561/0.0909,共有6468个独立衍射点,其中[I > 2σ(I)]的有3157个。该化合物具有新颖的二维{(Hg2Cl5)[Er(C6NO2H4)3(H2O)2]}层状结构,由Hg2Cl5–连接[Er(C6NO2H4)3(H2O)2]链形成。该二维层和氯化汞及结晶水之间通过氢键形成三维结构,甲醇分子和水合锌离子位于该三维结构的空隙中。对化合物1的磁性测试显示该化合物具有反铁磁作用。     

LiFePO4 doped with magnesium prepared by hydrothermal reaction in glucose solution

Lithium iron phosphate （LiFePO4） doped with magnesium was hydrothermally synthesized from commercial LiOH, FeSO4, H3PO4 and MgSO4 with glucose as carbon precursor in aqueous solution. The samples were characterized by X-ray powder diffraction, scanning electron microscopy and constant charge-discharge cycling. The results show that the synthesized powders have been in situ coated with carbon precursor produced from caramel reaction of glucose. At ambient temperature （28±2℃）, the electrochemical performances of LiFePO4 prepared exhibit the high discharge capacity of 135 mAh g^-1 at 5C and good capacity retention of 98% over 90 cycles. The excellent electrochemical performances should be correlated with the intimate contact between carbon and LiFePO4 primary and secondary particles, resulting from the in situ formation of carbon precursor/carbon, leading to the increase in conductivity of LiFePO4.     

A new dihydrobenzofuran lignanoside from Selaginella moellendorffii Hieron

A new lignanoside, （7R,8S）-7,8-dihydro-7-（4-hydroxy-3,5-dimethoxyphenyl）-1＇-formyl-3＇-y-methoxyl-8-hydroxymethylbenzo- furan-4-O-β-D-glucopyranoside （moellenoside A）, was isolated from Selaginella moellendorffii Hieron. Its structure was determined by spectroscopic evidences. 2007 Wei Sheng Feng. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

Decomposition Reaction of Zn-MPA（3-Mercaptopropionic Acid） Complex Under Microwave Irradiation

The thermal decomposition of Zn-MPA complex was investigated under microwave irradiation. ZnO and ZnS nanocrystals could be obtained by decomposing Zn-MPA（3-mercaptopropionic acid） complex under different reaction conditions. It was found that both the pH value of the solution and the molar ratio of Zn2＋ and MPA can play an important role in the formation of ZnO and ZnS nanocrystals. MPA mainly acts as an S source or as a complexing agent. This study provides a new route for the controllable preparation of semiconductor nanocrystals.     

纯与掺杂CeO2的氧化还原性质及其催化领域的应用

概述了纯与掺杂CeO2氧化还原性质的研究状况及CeO2单独/主成分使用方式在催化领域中的应用.由于CeO2具有优异的储放氧性能,以及吸附气体和反应中间物能与几个Ce3 同时作用,其在氧化还原、合成气生产、有机合成和有机污染物降解等反应过程中呈现出良好的催化性能,而通过恰当的掺杂往往能使之得到进一步提高.最后,结合现状对其未来研究方向进行了展望.     

Matrix-assisted pulsed laser evaporation of polyimide thin films and the XPS study

Compared with the traditional thin film techniques, the matrix-assisted pulsed laser evaporation (MAPLE) technique has many advantages in the deposition of polymer and organic thin films. It has a wide range of applications in many fields, such as non-linear optics, luminescent devices, electronics, various sensors. We have successfully deposited polyimide thin films by using the MAPLE technique. These films were characterized with XPS. The XPS spectra showed that the single-photon effect is ob-vious at low laser fluence and the chemical bonds will be broken, resulting in decomposition of the films. Contrarily, the single-photon effect will decrease and the multi-photon effect and the photothermal effect will increase at high laser fluence, resulting in the protection of the structure of the polyimide thin films and the obvious decrease in decomposition. High laser fluence is more suitable for the deposition of polymer and organic thin films than low laser fluence.